Home Remodeling in Los Angeles, CA

Home remodeling in Los Angeles: project types and where to start

Each project type has its own guide. Pick the one closest to yours:

For single rooms, start with kitchen remodeling in Los Angeles or bathroom remodeling, and for floors alone see the flooring section. Water or fire damage has its own path under damage repair.

Signs the house needs a multi-room plan, not a one-room fix

• Three or more floor types meeting in the main living areas.
• Kitchen and bath cabinets from different decades that no longer match each other or the trim.
• Carpet over original hardwood in some rooms and worn vinyl in others.
• A planned addition or ADU that will make older rooms look dated beside it.

Looking for a remodeling contractor in North Hollywood? Start with the scope

A remodel has a building side and a finish side. Knowing which is which keeps bids honest and avoids gaps where nobody is responsible.

The 2015 version of the business’s website described projects ranging from residential remodels to commercial damage repairs, including kitchens, bathrooms, additions and whole homes; finishing a new wing is covered under room additions. Call the showroom to talk through which parts of a larger project it can take on today; for structural or permitted work, hire a B general building contractor and check the license on the CSLB website.

Residential and commercial remodeling: same materials, different demands

The showroom serves both homes and businesses, and many products cross over. What changes is how hard they are used and who signs off.

• Homes weigh look and feel heavily: wood species, a warm floor underfoot, a vanity that suits the house’s era. A backyard unit is its own case, covered under ADU kitchen and bath finishes.
• Rentals put durability and repeatability first: waterproof vinyl or porcelain floors, standard cabinet sizes and prefab tops that can be replaced unit by unit. See rental and multifamily renovation.
• Commercial spaces need finishes that take foot traffic and cleaning, and work that fits around business hours and building management rules, as described under commercial remodeling.

How do you keep interior remodeling consistent across rooms?

The most common mistake in a multi-room project is choosing each room on its own and ending up with five wood tones and three grays. A few rules keep a house coherent, and the whole-house remodel page goes further:

1. Run one floor through the main living areas so there are no thresholds between the entry, living room, hallway and kitchen.
2. Repeat one cabinet finish or wood tone between the kitchen and the baths, even if the door styles differ.
3. Keep metals consistent across faucets, cabinet pulls and lighting on each floor.
4. Choose tile last in each room, after cabinets and counters, because tile is the easiest place to add contrast.
5. Order flooring for every room in one batch when possible, so planks come from the same production run.

How a multi-room project runs from the showroom

1. 1

   Share the plans

   Bring the contractor’s floor plan or your own sketch with room dimensions, and note which walls or fixtures are moving.

2. 2

   Set the palette

   Choose the main floor, the kitchen cabinet finish and the countertop first, since they cover the most area.

3. 3

   Fill in room by room

   Pick bath vanities, tops, shower and floor tile, and any carpet for bedrooms or stairs to match the palette.

4. 4

   Coordinate with the builder

   Confirm cabinet dimensions, appliance sizes and floor heights with the general contractor before ordering.

5. 5

   Order in phases

   Time deliveries so materials arrive when each room is ready, rather than all at once into a construction zone.

6. 6

   Install in sequence

   Cabinets, then counters, tile and floors, with installation of the products you bought booked on request.

What moves home remodel cost in Los Angeles?

• How much is structural. Moving walls, plumbing and gas lines raises cost far more than upgrading finishes.
• The age of the house. Pre-1940s and mid-century homes often hide galvanized pipe, old wiring, plaster walls and uneven floors.
• Square footage of flooring and tile, and whether old flooring has to be removed and the subfloor leveled.
• Cabinet grade and quantity, from stock to custom, across kitchen, baths and laundry.
• Countertop type: prefab stone for secondary rooms can balance a slab in the kitchen.
• Permits and plan check for any work that triggers them.

Pricing the finish package separately from the building work makes it easier to see where the budget goes and where it can be trimmed.

Permits, older homes and who to check

In the City of Los Angeles, LAMC §91.106 sets out when a permit from LADBS is required, which includes structural, plumbing, electrical and mechanical changes. Cities such as Burbank, Glendale and Pasadena have their own building divisions, and unincorporated areas fall under LA County Building & Safety. Homes built before 1978 may contain lead-based paint, and the EPA’s Renovation, Repair and Painting rule requires lead-safe practices from certified firms when that paint is disturbed. Before signing with any contractor, look up the license on the CSLB site. The prime contractor on a multi-trade remodel normally holds a B general building license, while specialty work carries its own classification: C-36 plumbing, C-10 electrical, C-6 cabinet and millwork, C-54 tile and C-15 flooring.

What each Los Angeles house era tends to need

• 1910s-1930s Craftsman and Spanish homes: raised wood floors, mortar-bed tile and plaster walls, so floors get checked for level before new tile or wood.
• Post-war slab tracts: concrete under every room, which steers floors toward engineered wood, vinyl plank or porcelain after a moisture test.
• 1970s-1990s builder homes: oak cabinets, cultured marble tops and wall-to-wall carpet, usually replaced together.

Why Adcom as a San Fernando Valley remodeling company for finishes

• Cabinets, counters, tile and flooring side by side, so a whole house can be chosen in one place.
• Residential and commercial work, both listed on the business’s websites.
• Material at a range of price levels, from prefab tops and laminate to slab stone and hardwood.
• Installation of selected products on request, or materials only for your builder.
• The same Sherman Way address across every saved copy of the website from 2015 to now.

Remodeling clients come from Santa Clarita, Pasadena, Santa Monica and every corner of Los Angeles.