Skip to content
Adcom Kitchen & Flooring
1920s Spanish Revival and Tudor houses on a hillside Glendale street at the foot of the Verdugo Mountains

Glendale, Los Angeles County

Kitchen Remodeler in Glendale, CA

If you need a kitchen remodeler in Glendale, CA, the North Hollywood showroom is about 24 minutes (16 miles) west along the 134, near enough to compare tile against a photo of your old counters and come back with a second shortlist. Glendale is really two housing markets in one city: 1920s Spanish Revival and Tudor homes in hillside neighborhoods such as Rossmoyne, Chevy Chase Canyon and Verdugo Woodlands, and dense apartment and condo blocks in south Glendale. Each needs a different approach to cabinets, tile and floors.

about 24 minutes (16 miles) from the North Hollywood showroom

Spanish and Tudor kitchens from Rossmoyne to Verdugo Woodlands

North of downtown, the streets climbing toward the Verdugo Mountains are full of 1920s and 1930s houses with arched openings, plaster walls and steep Tudor rooflines. Some still have original glazed counter tile, a tiled range hood surround or a breakfast nook with built-ins. Owners often want to keep that character while gaining storage and a modern sink and range.

That usually means painted Shaker or inset-look doors in cream, green or deep blue, handmade-look or mosaic tile in colors that echo the original, and warm oak or wood-look floors. Plaster walls are rarely perfectly flat or plumb, so cabinet fillers and scribe moldings matter more than in newer homes.

Glendale 1920s Spanish Revival kitchen with deep blue painted cabinets and glazed backsplash tile
Painted doors and glazed tile keep a 1920s kitchen in character.Illustration

Higher up, Chevy Chase Canyon in the San Rafael Hills and the streets below Deukmejian Wilderness Park in the Verdugos border dry brush, and much of that hillside edge is mapped as a very high fire hazard severity zone. Many of these 1920s houses also stand on raised foundations over crawl spaces, so a slightly springy kitchen floor needs stiffening before large porcelain or stone goes down.

Plywood underlayment being screwed down over an old plank subfloor in a 1920s hillside Glendale kitchen
Stiffening an older raised subfloor before tile protects grout lines from cracking.Illustration

Glendale Building & Safety, historic districts and GWP

Glendale has its own Building & Safety section, which means LADBS plays no part here. New cabinets, counters, tile and flooring set where the old ones were are generally cosmetic. Shifting a sink, running a new 240-volt line for an induction range or cutting into a bearing wall is a different matter: Glendale wants a permit, and the people doing it should hold the right state license, which takes a minute to confirm on the CSLB website.

Several older neighborhoods sit within locally designated historic districts, where exterior changes such as new windows can face design review; interior kitchen work usually does not, but confirm with the city’s planning staff if you are near a district boundary. Electricity and water come from Glendale Water & Power, the city-owned utility, which is worth checking before you buy an induction range or add a circuit.

Planning a project in Glendale?

Call the showroom with photos and rough measurements of your Glendale home, or plan a visit to compare materials side by side.

South Glendale condos and apartments near Brand Boulevard

Below the 134, around Brand Boulevard and the blocks south and east of downtown, many households live in condos and apartments built from the 1960s onward. Kitchens are compact galleys or L-shapes, and HOA rules typically govern work hours, elevator reservations, debris removal and sound underlayment for hard floors.

Street parking around the Americana at Brand and the Glendale Galleria fills early, so condo deliveries in those blocks work best with a reserved loading spot or a morning window agreed with the building manager.

  • Ask your HOA for its flooring rules before choosing; many require an acoustic underlayment under tile, vinyl or wood.
  • Measure the elevator and hallway turns; full-height pantry cabinets and long slab pieces must fit through them.
  • Prefab countertops and stock cabinet sizes keep short galley runs affordable and simple to deliver.
Wrapped cabinet boxes on a moving dolly in the carpeted hallway of a south Glendale condo building
Hallway turns and elevator size decide how large a cabinet box can be delivered in one piece.Illustration

Kitchen remodeler options suited to Glendale homes

Along the 134 from Sherman Way: planning a Glendale project

  • Photograph any original tile you want to echo, in daylight, with a coin or tape measure for scale.
  • Drive west on the 134 and up the 170 to Sherman Way; the trip is about 24 minutes outside rush hour.
  • Hold doors, counter chips, tile and plank samples next to one another, and borrow a few to view in your own room.
  • For condos, bring your HOA’s rules so delivery windows and flooring underlayment are planned before ordering.
  • Order once measurements are confirmed, then schedule delivery and, if you like, installation of the chosen products.

No Glendale projects or Glendale-tagged reviews are shown here yet. What the record does show is a Sherman Way storefront kept since at least 2015 on every archived site, and Google reviewers who describe hexagon marble shower floors and arabesque wall tile on a multi-unit job. Neighbors in Burbank, La Crescenta-Montrose and Pasadena use the same showroom.

Compact condo galley kitchen in south Glendale with white flat-panel cabinets and wood-look vinyl
Stock cabinet sizes and prefab tops suit compact condo galleys.Illustration

What Google reviewers say about the showroom

Quoted from public Google reviews. Adcom Kitchen & Flooring has 20 Google reviews; read them all on Google.

“Helped so much with tile for my kitchen remodel. Tony, Jr. Knew his stuff and didn’t try to sell me stuff I didn’t want. Thank you!”
Mimi K. Google review · c. 2023
“Tony is the best. Great Value, and service. Tony stands behind his products. His granite installers went above and beyond and handcrafted a part of the counter top that required extra effort.”
Vince G. Google review · c. 2019

Glendale questions

Can you match tile and cabinets to a 1920s Spanish-style home in Glendale?

You can get close in spirit rather than an exact copy. Original 1920s tile is rarely still made, but glazed, handmade-look and mosaic tiles in similar colors work well beside it, and painted Shaker or inset-look doors suit Spanish Revival kitchens. Bring photos and, if possible, a loose original tile to the showroom so samples can be compared directly.

How long does a kitchen remodel in Glendale usually take?

A same-layout kitchen generally takes a few weeks on site once materials arrive, with ordering setting the pace: stock cabinets and prefab tops move faster than semi-custom lines, and slab counters are templated after cabinets go in. Condo jobs can stretch if HOA approvals or elevator bookings are slow, and moved plumbing adds Glendale permit inspections.

Can flooring for the rest of my Glendale home be installed with the kitchen?

Yes. Hillside homeowners often carry one oak-toned floor from the kitchen into the dining room, and condo owners frequently replace carpet across the whole unit at once. In condo buildings, confirm the HOA’s underlayment rule first. Installation of the flooring you buy is available on request.

How far is Glendale from your North Hollywood showroom?

About 24 minutes (16 miles) from central Glendale, depending on traffic. Most people take the 134 west and the 170 north, or follow surface streets through Burbank. Coming from the Verdugo Woodlands or Chevy Chase Canyon side adds a few minutes to reach the freeway.

Nearby areas we serve

Call before your Glendale visit

A quick call lets the showroom pull samples for your project before you make the drive.

Adcom Kitchen & Flooring · 13259 Sherman Way, North Hollywood, CA 91605 · Get directions · Showroom hours

Call (818) 765-9955 Directions